Try this following command in the terminal prompt:
#ifconfig lo:0 192.168.0.254 netmask 255.255.255.224 up
Saturday, July 21, 2012
Subscribe to:
Post Comments (Atom)
Popular Linux Posts
-
Features RHEL 7 RHEL 6 Default File System XFS EXT4 Kernel Version ...
-
DNS Configuration in RHEL 5 Step 1: set static ipaddress by using these commands system-config-network or ifconfig eth0 192.168.0.254 Step ...
-
pdftotext is installed using poppler-utils package under various Linux distributions: # yum install poppler-utils OR use the following under...
-
Airtel 4G dongle in Ubuntu works good without installing its drivers. It works via Mobile Broadband. Choose country -> India Choose ... -
Server side configuration: Step 1: Install createrepo.rpm from the DVD for creating repository. # rpm -ivh createrepo.rpm (Instal... -
YUM Server Configuration in RHEL5 (Yellow Dog Updater Modified) -for increasing the package integrity. Step 1: install createrepo.rpm fro...
-
Step1: Open the below configuriaton file vi /etc/network/interfaces Step2: Enter the ip address as below in the same file. auto lo eth...
-
1. Copy the Linux directory to hard disk. 2. #chmod +x *.* because, the file is for Linux installer has not have the permission to execut... -
Step 1: Insert the 3G usb dongle in the USB port Step 2: It will be detected with in minutes Step 3: Go to linux folder ... -
The following steps configure a USB pen drive as a boot medium to start the installation of Red Hat Enterprise Linux. Attach the USB pen dri...
0 Comments:
Post a Comment