IPv6 Linux firewall script

Q. IPv4 by default protect internal host using RFC 1918 private IP address. But IPv6 offers direct global address which result into exposing all internal hosts as well. How do I create default IPv6 firewall to drop all incoming (except ping6 request) connection and only allow outgoing requests from Linux workstation?

A. You need to use Ip6tables command to create IPv6 firewall scripts. Ip6tables is used to set up, maintain, and inspect the tables of IPv6 packet filter rules in the Linux kernel.

A note about IPv6 private ips

IPv6 does not include private network features such as NAT. Because of the very large number of IPv6 addresses. However, FC00::/7 prefix used to identify Local IPv6 unicast addresses. All IPv6 users should be able to obtain IPv6 address space for use at their discretion and without artificial barriers between their network and the Internet.

Sample Restricted IPv6 Linux Firewall Script

#!/bin/bash

IPT6="/sbin/ip6tables"

PUBIF="eth1"

echo "Starting IPv6 firewall..."

$IPT6 -F

$IPT6 -X

$IPT6 -t mangle -F

$IPT6 -t mangle -X

#unlimited

$IPT6 -A INPUT -i lo -j ACCEPT

$IPT6 -A OUTPUT -o lo -j ACCEPT

# DROP all incomming traffic

$IPT6 -P INPUT DROP

$IPT6 -P OUTPUT DROP

$IPT6 -P FORWARD DROP

# Allow full outgoing connection but no incomming stuff

$IPT6 -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

$IPT6 -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT

# allow incoming ICMP ping pong stuff

$IPT6 -A INPUT -p ipv6-icmp -j ACCEPT

$IPT6 -A OUTPUT -p ipv6-icmp -j ACCEPT

############# add your custom rules below ############

#$IPT6 -A INPUT -p tcp --destination-port 80 -j ACCEPT

#### no need to edit below ###

# log everything else

$IPT6 -A INPUT -j LOG

$IPT6 -A INPUT -j DROP